Lifting equipment
- Textile Lifting Slings
- Reťazové viazacie prostriedky
- Lifting clamps
- Upínacia technika
- Zdvíhacia technika
- Oceľové laná a viazaky
- Ratchet lever hoists
- Hand chain hoists
- Cable puller
- Steel jack
- Trolleys
- Beam clamps
- Electric chain hoists
- Manual winches
- Pneumatic chain hoists
- Pulley blocks
- Cable grips
- Crane Weighers and Loa indicator
- Lifting magnets
- Lifting points
- Hydraulic Jacks
- Hand pallet trucks
- Scissor pallet truck
- Manual drive stackers
- Electric pallet trucks
- Electric pedestrian stackers
- Hand pallet trucks with weighing system
- Elevating platform
- Load Moving Systems
- Electric winch
- Vacuum manipulators
- Vacuum hose lifting manipulators
- C-hooks
- Stacking hook
- Weld-on hooks
- Balancers
Lifting equipment There are 581 products.
-
VRBG 31,5/50/150 - Load ring on plate for...
Load ring VRBS welded on a boltable plate.Smaller bolt diameter, favourable distribution of the introduced forcesFor further details refer to the product information sheet.
-
VABH-B Excavator hook - RUD
Excavator hook used as a lifting point for wire rope slings, round slings, and lifting means with an oval suspension ring or eye. With a stable safety latch, which is protected by a ridge similar to that of the VCGH.Thickened tip of the hook to avoid misuse. Thus hooking into smaller openings is impossible.
-
VCGH-G Excavator hook - RUD
Excavator hook used as a lifting point for wire rope slings, round slings and lifting means with an oval suspension ring or eye. With a stable hook securing mechanism comparable to that of the VCGH. Min. bolt quality is 10.9. Only the provided bolts should be used. The surface is pink powder coated. Pay attention to the permissible load direction.
-
VLBS Load ring for welding - RUD
An enhancement of the well-established LBS with an up to 50% increment of the WLL! The new VLBS ring bracket is forged out of the high strength material CrNiMo with 2 patented inner supporting lugs. It provides an optimal sitting of the hook and offers better protection for the clamping springs. WLBS-U with spring
-
VLBS-U-LT Load ring for welding,especially...
Load ring VLBS-U-LT for low temperatures as far as -45°C (low temperature marking at weld-on block) Impact energy ≥ 27 Joule at -45°C (can be attested with a 3.1 test certificate) Analog to a conventional VLBS-U plus useable for low temperatures
-
VLBS-P Load ring for welding, especially...
Load ring welded for pipes for pipe diameters from 82 to 220 mm. For larger pipe diameters, the standard version VLBS can be used.
-
LBS-RS Load ring for welding stainless...
A stainless steel load ring for welding made of the material 1.4571 = in welded condition resistant against intercristalline corrosion - in permanent operation up to 400°C. The chemical resistance and resistance against pitting by chloride media has increased due to the Mo contents. The material 1.4571 is widely used in the chemical industry, petroleum,...
-
VRBS-FIX Load ring for welding for...
Weld-on parts without bothersome subsurface corrosion due to circular HY-weld seam. Smaller weld seam compared to the previous VRBS. Total length and total width identical to the previous VRBS. No time-consuming alignment between the weld-on blocks and ring. Clamp spring is protected placed inside the weld-on block.
-
VRBS - Load ring for welding - RUD
An enhancement of the well established RBS series with an up to 30% increment of the WLL! The two points of attachment facilitate an even and optimal force distribution into the work piece and thus, usage of thinner base plates is possible.A forged, pink coated ring bracket according to EN1677-1. The welding block is forged out of a good welding material...
-
VRBK-FIX Load ring for welding for...
An enhancement of the well-established VRBK - series.A forged ring bracket according to EN1677-1, electromagnetically crack detected, pink powder coated and it can be loaded in all directions. No time-consuming alignment between the weld-on blocks and ring. Clamp spring is protected placed inside the weld-on block.
-
VABH-W Excavator hook, ready for welding -...
Excavator hook used as a lifting point for wire rope slings,round slings and for lifting means with an oval suspension ring or eye. With a stable hook securing mechanism protected by a ridge, comparable to that of the VCGH . Thickened tip of the hook to avoid misuse, thus hooking into smaller openings is impossible.Patented wear marks on the hook.
-
VCGH-S Excavator hooks, ready for welding...
Excavator hook used as a lifting point for wire rope slings,round slings and for lifting means with an oval suspension ring or eye. With a stable hook securing mechanism protected by a ridge, comparable to that of the VCGH . Thickened tip of the hook to avoid misuse, thus hooking into smaller openings is impossible.Patented wear marks on the hook.
-
ABA Lifting point for welding - RUD
Loadable from any direction, Safetyfactor 4:1. Quentched and tempered part, thereby wear resistant.
-
LRBS-FIX Lashing-Load ring for welding...
Weld-on parts without bothersome subsurface corrosion due to circular HY-weld seam. Smaller weld seam compared to the previous LRBS. Total length and total width identical to the previous LRBS. No time-consuming alignment between the weld-on blocks and ring. Clamp spring is protected placed inside the weld-on block.
-
LRBK-FIX Lashing load ring for welding for...
Weld-on parts without bothersome subsurface corrosion due to circular HY-weld seam. Even force distribution owing to the two point attachment.Low profile sice it can be folded with in an angle range of 270°. No time-consuming alignment between the weld-on blocks and ring. Clamp spring is protected placed inside the weld-on block.
-
LPW Lashing-Point-Welding - RUD
Original VIP-Quality, marked at the welding block with the permitted lashing capacity "LC" in daN
-
SLP - Star Lasihing Point - RUD
Loadable from any side, Pivots 225°, Lashing possible even at overhanging load.
-
RS Eye bolt, UNC/UN thread - RUD
With the following characteristics, distinctive in comparison to the conventional DIN - eye bolts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8.
-
RM Eye nut, metric thread - RUD
With the following characteristics, distinctive in comparison to the conventional DIN - eye nuts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8
-
WBPG Hoist ring on plate for bolting - RUD
With 6 pcs RUD-bolts M48. Removable suspension ring in the shape of a shackle for the attachment of cable-laid grommets (with heavy load cable eyes). Loadable from any side in the direction of pivot, thereby suitable for lifting and turning of loads. Swivel bolt with ball bearing (for a shock-free turning by 360°). Threaded holes for Starpoint-VRS, for...
-
WPP-S PowerPoint® universal connection - RUD
The first generation of lifting points for welding with a universal connection for every slinging means (hook and ring assemblies, endless sling chains, round slings, loops, etc). Provided with a double ball-bearing which enables jerk - free tilting, swiveling and turning . The optimised design avoids the damaging of both the slinging means and the...
-
WPP-B PowerPoint® ring connection - RUD
The first generation of lifting points for welding provided with a double ball-bearing which enables jerk - free tilting, swiveling and turning . The optimised design avoids the damaging of both the slinging means and the precious load when swiveling.
-
WPP-VIP PowerPoint® direct VIP chain...
The first generation of weldable lifting points with a double ball-bearing for the direct connection of the 10 mm VIP - chain. Not suitable for permanent swiveling under full load
-
L-ABA Lashing point for welding - RUD
Loadable from any direction, Quentched and tempered part, thereby wear resistant.
