This chain has an added load capacity of at least 50 % compared to grade 8 and is manufactured in compliance with PAS 1061 (with modifications).
It is used to create I- and II-leg chain slings using the Connex CWP connecting link and opens up universal connection possibilities thanks to the flattened section incorporated in its design.
This is a universal connecting link that consists of two die-forged, identical halves, a bolt and a safety sleev.
This eye sling hook is universally usable and comes with a forged and galvanised safety catch that locks into the tip of the hook, thereby providing excellent protection against lateral shifts.
This safety hook corresponds to EN 1677-3 with a load capacity according to G12 and closes and locks automatically when placed under load, thereby offering even greater safety.
The standard shortening hook with BG-approval in the G12 programme is perfect both for the Connex and the welded system.
This grab hook with safety catch for the winner pro Connex system is the standard shortening hook with a safety bolt in the G12 lashing programme.
This universal load binder with an optimised lever length for one- and two-part lashing chain systems is suitable for direct lashing as well as for lashing down in the pewag winner pro Connex system.
Round steel chains pewag winner 400. According to EN 818-2 with increased load capacity.
This loader binder for one-part lashing chains in accordance with EN 12195-3 is also suitable for frictional lashing, depending on the selected lever length.
This load binder for two-part lasching chain systems in accordance with EN 12195-3 is intended for the ZKW lashing chain-the two are alwazs used in conjunction. The shortening hook with the PSW safety catch is already assembled.
The grade 10 clevis system of this extremly robust turnbuckle is die-forged and tempered on both sides.
The universal CW Connex connectiong link consists of two symmetrical, die-forged halves, one bolt and safety sleeve.
This universal clevis sling has a 25% higher lashing capacity than grade 8.
The eye sling hook may be used universally and comes with a die-forged safety catch that locks into the tip of the hook, thereby providing excellent protection against lateral shifts.
This standard shortening hook ensures optimal interaction between chain and hook thanks to the special design of the chain contact area.
Thanks to the flattened sections incorporated in the design, this master link opens up universal connection possibilities.
This standard shortening hook ensures optimal interaction betweem chain and hook thanks to the special design of the chain contact, providing extra protection from accidental chain release.
This load binder for two-part lashing chain system in accordance with EN 12195-3 is intended for the ZKW lashing chain.
The clevis system of this extremly robust turnbuckle is die-forged and tempered on both sides, in compliance with grade 8 and manufactured according EN 12195-3.
This new profile steel chain is manufactured according to the mechanical values of G12 and is suitable for a maximum operating temperature of 200°C.
A load capacity according to G12, BG-approval and manufacturing according to EN 1677-4 are powerful arguments in favour of this universally usable master link assembly to create II-, III- and IV-leg chain slings for all chain dimensions.
This asymmetrical master link assembly is equipped with extra-large rings that are perfect for crane hooks. The new design of the upper curve ensures an optimised contact surface on the crane hook.
The new oversize lifting eye stands out for its asymmetrical shape and is suitable for the assembly of II- and IV-leg chain slings, both in the assembled and in the welded system.