Categories
-
Lifting equipment
- Textile Lifting Slings
- Reťazové viazacie prostriedky
- Lifting clamps
- Upínacia technika
- Zdvíhacia technika
- Oceľové laná a viazaky
- Ratchet lever hoists
- Hand chain hoists
- Cable puller
- Steel jack
- Trolleys
- Beam clamps
- Electric chain hoists
- Manual winches
- Pneumatic chain hoists
- Pulley blocks
- Cable grips
- Crane Weighers and Loa indicator
- Lifting magnets
- Lifting points
- Hydraulic Jacks
- Hand pallet trucks
- Scissor pallet truck
- Manual drive stackers
- Electric pallet trucks
- Electric pedestrian stackers
- Hand pallet trucks with weighing system
- Elevating platform
- Load Moving Systems
- Electric winch
- Vacuum manipulators
- Vacuum hose lifting manipulators
- C-hooks
- Stacking hook
- Weld-on hooks
- Balancers
- Personal Protective Equipment
-
Climbing and sport
- Harnesses
- Carabiners and Express sets
- Crampons
- Anchors
- Ropes
- Ice axes
- Accessories
- Headlamps
- Ice screw
- Helmets
- Via Ferrata and sets
- Kladky
- Sľučky a popruhy
- Blokanty
- Zlaňovacie a istiace brzdy
- Bouldering
- Slackline
- Energy absorbers
- Rucksack
- Magnesium and chalkbag
- Snowshoes
- Pack
- Dehydrated food
- Mattresses
- Dishes
- Drinking systems and filters
- Sleeping bags
- Tents
- Bags and cases
- Cookers
- Hammock
- Towels and organizers
- Deckchairs and folding chairs
- Skialp and freeride
- Trekking poles
- Spray to deter bear attack
- Snow chains Pewag
- Rental service
List of products by manufacturer TERRIER
-
FBK vertickal clamp TERRIER
For lifting and moving of steel beams, profiles and structures where the load must stay in position. The special shape of the lifting shackle places the centre of the gravity of the beam beneath the lifting shackle. This maintains the equilibrium of the beam once it has been lifted and keeps the flanges vertical so that the beam can easily be stacked or...
-
FHX / FHSX horizontal clamps TERRIER
For horizontal lifting and moving of steel plates. Clamp with compact shape and relative light unit weightbut with a high lifting capacity. FHX/FHSX pewag winner lifting clamps must always be used in pairs (or multiples thereof).
-
FHX-V horizontal clamps TERRIER
The FHX-V horizontal lifting clamps has a spring attached to the cam assembly allowing the clamp to close on any desired spot. The spring allows one operator to place the clamps and guide the hoist. FHX-V horizontal lifting clamps must always be used in pairs (or multiples thereof).
-
FSV / FSVS / FSVSU Screw clamps TERRIER
Only suitable for lifting and moving of steel beams and structures. The clamping force is evenly transferred to the jaws by means of a spindle. Can also be attached upside down and be used as a (temporary) lifting point. Has equal opening and closing of both jaws for simple and quick assembly. Lifting capacity and jaw opening are clearly engraved in the...
-
TBC / TBC-A pipe lifting clamp TERRIER
These clamps are preferably used for vertical lifting and moving of concrete pipes and wells. TBC-A: min. 50 mm/max. 220 mm Adjustable in steps of 25 mm.
-
TBLC vertical clamps TERRIER
For vertical lifting and moving of various materials as steel, wood, plastic, concrete, marble etc. which have parallel sides.
-
TBS Multi-purpose screw clamp TERRIER
For use as a temporary lifting point in any room where HP-profile is being used, such as sectional ship parts and ship engine rooms. The TBS clamp is equipped with a thread spindle for attaching the clamp. The clamp is used for HP-100 to HP-240 (HP = Hollandprofile).
-
TCK vertical lifting clamps TERRIER
For vertical lifting and transporting of structures where a square tube is used as frame. For example mobile units etc.
-
TDH horizontal clamps TERRIER
For lifting and horizontal moving of thin sheets that deflect when being lifted. Compact shape and relatively low unit weights with a high lifting capacity.
-
TJP / TJPU vertical clamp TERRIER
For vertical lifting and moving of panels and plates. If the clamp is being loaded, the cams will pull out sideways and will grip into the sides of the load. The TJP clamp is locked in closed as well as in open position. Lifting capacity and jaw opening are clearly engraved in the body. Clamp type TJPU is equipped with a moveable lifting shackle.
-
TNMH horizontal clamps TERRIER
TheTNMH lifting clamp is suited for moving and lifting objects with fragile surfaces, like stainless steel, wood panels, aluminium etc. The jaw and cam is covered with a high quality, pressure resistant protective cover.
-
TNMK / STNMK / TNMKA vertical lifting...
TNMK is a non-marking clamp with two special synthetic pads. The clamp can be used for lifting, handling and moving of (stainless) steel, aluminium, wood and marble plates and will not leave any marks. The clamp is locked in closed as well as in open position and is mounted in the crane hook by means of a lifting chain with reeving link.
-
TOBK vertickal clamp TERRIER
For lifting and moving of steel beams, profiles and structures. Because of the safety mechanism, the TOBK clamp is locked in closed as well as in open position. The clamp is suitable to lift steel beams on the flange as well as on the upper ends of the beam. Other jaw-openings and Working Load Limits are available upon request.
-
TPH / TPH-HD Screw clamps TERRIER
For horizontal lifting and moving of steel and concrete pipes. Compact shape and relatively low unit weight with a high lifting capacity. The surface is equipped with “special” plastic cover. Plastic cover replacement parts are available and easy to change.
-
TRC vertical clamps TERRIER
For horizontal transport of rail profiles. Terrier TRC is equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. The clamp is locked in closed as well in open position. Other capacities or other profile dimensions are available upon request.
-
TS / TSE / STS vertickal clamp TERRIER
For vertical lifting and moving of steel plates and structures. The TS / STS lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. The clamp is locked in closed as well as in open position. The STS types are supplied with enlarged jaw opening. Minimum W.L.L....
-
TS-R / TSE-R / TSU-R / TSEU-R vertical...
For lifting and moving of stainless steel plates and structures a TSU-R lifting clamp is available. Pivot and cam are made of stainless steel. Body and lock lever are nickel plated to prevent corrosion due to carbon contamination.
-
TSCC / TSCC-W Screw clamps TERRIER
Universal screw clamp for vertical and horizontal lifting and moving of a large variety of steel structures. The TSCC screw clamp is fitted with a moveable cam on the thread spindle and a fixed pivot on the clampbody. This provides a powerful clamping force on the workpiece. The moveable lifting eye ensures a secure mounting of the clamp.
-
TSEU-A vertical clamp TERRIER
Only one clamp is needed for different kind of jobs. Also the same clamp can be used if a big jaw opening is necessary. For lifting and moving of steel plates and structures from all positions. Jaw opening from 0 - 95 mm. Adjustable by steps of 30 mm. Capacity 3.000 kg. Strong and lightweight construction.
-
TSHP / TSHP-A vetical clamp TERRIER
For lifting and moving of Holland-profile (HP) steel rails and structures with HP-profiles. Also useful as a “big-jaw” opening clamp (e.g. serving of lathes with large discs). Equipped as standard with three pivots for extra powerful clamping force.
-
TSHPU vertical lifting clamps TERRIER
This special version with a movable support ring and two tooth rings is another addition to our product range. This clamp is designed to be used for moving, lifting and lowering Holland profiles and/or construction units with built-in Holland profiles.
-
TSMP / TSEMP / STSMP vertical clamp TERRIER
The TSMP, STSMP lifting clamps are equipped with a three way multi-purpose lifting shackle. The lifting shackle has a three way articulated linkage arrangement. For lifting and moving of all steel plates and structures. When attached to a fixed load bearing arm (e.g. spreader bar) the clamp will retain its flexibility and no chain is needed.
-
TSU / TSEU / STSU vertical clamp TERRIER
Capacity 750 - 30 000 kg Clamp-version with moveable lifting shackle for lifting and moving steel plates and structures from all positions (horizontal, vertical and sidelong). TSU, STSU Lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
-
TTL vertical clamps TERRIER
For vertical lifting of tubes, bundles of tubes and solid round material.
