Lifting equipment
- Textile Lifting Slings
- Reťazové viazacie prostriedky
- Lifting clamps
- Upínacia technika
- Zdvíhacia technika
- Oceľové laná a viazaky
- Ratchet lever hoists
- Hand chain hoists
- Cable puller
- Steel jack
- Trolleys
- Beam clamps
- Electric chain hoists
- Manual winches
- Pneumatic chain hoists
- Pulley blocks
- Cable grips
- Crane Weighers and Loa indicator
- Lifting magnets
- Lifting points
- Hydraulic Jacks
- Hand pallet trucks
- Scissor pallet truck
- Manual drive stackers
- Electric pallet trucks
- Electric pedestrian stackers
- Hand pallet trucks with weighing system
- Elevating platform
- Load Moving Systems
- Electric winch
- Vacuum manipulators
- Vacuum hose lifting manipulators
- C-hooks
- Stacking hook
- Weld-on hooks
- Balancers
Lifting equipment There are 581 products.
-
YALE TBP Non-marring grab
Capacity 500 - 1500 kg The TBP non-marring grab is suitable for lifting, turning and transporting of plates with a sensitive surface without leaving behind indentations.
-
YALE TSB Grab with chain
Capacity 350 - 1250 kg The TSB grab has parallel-facing jaws that equally distribute the clamping pressure over a relatively large surface area.
-
YALE TTG Girder grab
Capacity 500 - 7500 kg The girder grab TTG is designed for the horizontal transport of girders, metal plates, profiles etc.
-
YALE TTR Girder grab
Capacity 750 - 3000 kg The girder grab TTR is designed for vertical transport, especially for lifting and stacking of girders.
-
YALE TTT Girder grab
Capacity 750 - 4500 kg The girder grab TTT is used for the horizontal transport of steel girders. Due to the split fixed jaw, it can be positioned centrally on the end of the beam.
-
YALE TCH Horizontal lifting gear
Capacity 1000 - 10000 kg The TCH horizontal lifting gear consists of two clamps with a two-legged chain sling.
-
YALE THS Lifting clamp
Capacity 750 - 4500 kg The THS lifting clamp is normally used in pairs especially for the horizontal transport of plates.
-
YALE TWH Lifting clamp
Capacity 1500 - 5000 kg The TWH lifting clamp, when used in pairs, is well-suited for horizontal transport of individual and bundled plates.
-
YALE THK Lifting clamp
Capacity 750 - 9000 kg The THK lifting clamp, when used in pairs, is especially well-suited for horizontal transport of thin plates that have a tendency to sag.
-
YALE TSH Screw clamp
Capacity 750 - 5000 kg The screw clamp offers many possible applications. It is particularly useful for lifting, turning and pulling steel plates, girders and steel constructions.
-
YALE TSD Screw clamp
Capacity 1500 - 7500 kg The TSD screw clamp is a valuable asset when lifting, pulling and fitting sheet material as well as s teel constructions.
-
YALE TSZ Screw clamp
Capacity 500 - 7500 kg The TSZ screw clamp is designed to pull in three directions. It offers many different possibilities for transporting steel constructions, feeding machining centres, etc.
-
YALE TCR Rail grab
Capacity 1000 - 2000 kg The TCR rail grab transports rails, as used by railways, easily and safely.
-
YALE TDI Inside grab
Capacity 100 - 5 000 kg Inside g rabs are available in three versions for the handling of cylindrical and rectangular hollow bodies. The clamping jaws are available with optional steel jaws, hard manganese serrated jaws or jaws with protective lining, which are designed to grab a variety of shapes and materials. These inside grabs can be equipped with an...
-
YALE TFRK Barrel rim clamp
Capacity 500 kg The TFRK barrel rim clamp can be used individually, as a pair, or as a multi-legged chain sling.
-
YALE TFK Barrel clamp
Capacity 500 kg Its light weight and small overall design makes it ideal for lifting barrels where access or space is limited.
-
YALE BTG Concrete pipe lifting gear
Capacity 1500 - 3000 kg Lifting gear for the vertical transport of concrete pipe and culverts must be very versatile.
-
YALE TRO Pipe hook
Capacity 2000 - 10000 kg The pipe hooks are used in pairs for the safe transport of pipes.
-
-
YALE TTS-H H-frame spreader beam
Capacity up to 25 000 kg For the transport of symmetrical and asymmetrical loads.
-
YALE TTS-Z Fork lift cross beam
Capacity 2 000 - 5 300 kg The model TTS-Z with two bags is used for forklift tines and has one centered, pivoting eye hook (do not pivot under load).
-
YALE TKG-VHS Crane fork
Capacity 200 - 5000 kg These crane forks are equipped with adjustable tines, height adjustability and an automatic balancing system. Crane forks with automatic balancing tend to point their tines upward when being transported.
-
YALE TKG-VH Crane fork
Capacity 1000 - 5000 kg These crane forks are equipped with adjustable tines and height adjust ability. The balancing system engages when the shackle is manually hooked into the appropriate notch.
-
YALE TKE Crane weigher
Measuring range 0 - 9,5 t The crane weigher TKE is compact measuring device for the weighing of loads. Due to the compact design and robust steel housing the crane weighers are suitable for a wide range of applications.
