> >>>PEWAG PLAW winner profilift alpha
PLAW pewag winner profilift alpha View larger
Previous Next

PEWAG PLAW winner profilift alpha

Capacity 300 - 20 000 kg

360° rotatable lifting point. The load ring is loadable in a range of 130° and can be positioned at any required angle due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw from grade 10.9 material, which is sesecured against loss.

More details

Price:

on demand

More info

360° rotatable lifting point. The load ring is loadable in a range of 130° and can be positioned at any required angle due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw from grade 10.9 material, which is sesecured against loss. The screw is 100% crack detection tested as well as covered with a chromate VI-free protection against corrosion, and marked with the load capacity and thread size.
 
pewag winner profilift alpha is able to withstand a 4-fold safety against break in all directions. Each lifting point is marked with an individual serial number that allows product traceability. pewag winner profilift alpha is available with metric or UNC-thread, whereas the lifting points with metric thread are also obtainable with customized thread lengths. The table with the working load limit depending on the type of application as lifting gear, number of legs and angle of inclination is a part of the user manual and packed together with each lifting point.

Permissible usage
Load capacity acc. to the inspection certificate respectively table of
WLL in the mentioned directions of pull – see picture 1.

Non permissible usage
Make sure when choosing the assembly that improper load can
not arise e.g. if:
• The direction of pull is obstructed
• Direction of pull is not in the foreseen area (see picture 2)
• Load ring rests against edges or load (picture 3)
 
The load ring must be placed in the direction of pull before loading
– do not turn under load. For more details please have a look into
our user manual.
 
To calculate the necessary thread length (L):
L= H + S + K + X
 
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
 
In case of requesting a lifting point with a special thread length,

please mention the requested thread length “L”.

Product combinations

Model Capacity WLL in kg Thread The standard length of thread, mm
PLAW 0,3T 300 M8 20
PLAW 0,63T 630 M10 20
PLAW 1T 1 000 M12 33
PLAW 1,5T 1 500 M16 33
PLAW 2,5T 2 500 M20 33
PLAW 4T 4 000 M24 36
PLAW 6T 6 000 M30 49
PLAW 7T 7 000 M36 55
PLAW 8T 8 000 M36 55
PLAW 10T 10 000 M42 65
PLAW 15T 15 000 M42 63
PLAW 20T 20 000 M48 73

30 other products in the same category: